PRODUCTS

  • UPVC Pipes for Potable Water supplies
  • UPVC Casing pipes for borewells.
  • UPVC Column Pipes for Submersible Pumps
  • UPVC Plumbing pipes
  • UPVC Pipes for Cable duct
  • UPVC Pipes for Sewerage Application
  • UPVC – Threaded Superior Quality Special Purpose ASTM Plumping Pipe
  • HDPE Pipes for water supply
  • HDPE Pipes for cable duct
  • HDPE Pipes for Chemical Transporation
  • HDPE Pipes for Compressors & Borewells
  • LLDPE Pipes for Irrigation
  • Emitters

ARIYA HI-TECH PIPE AND COMPONENT PVT LTD is the leader in the manufacturing of UPVC Column Pipe .the column Pipe is used in the borewells . It is replace old conventional costly GI Pipes .Infact around 2 lackes borewells all over India running with our JAWAN branded Column Pipe.

CASING PIPE

UPVC casing pipes for Bore / Tubewell Applications

The fresh water is lying down below the ground level .Now Normally G.I pipes use to the extract water from the ground level to the various heads .When are using G.I pipes Corrode easily in aggressive solids .Now the conventional G.I pipes replace the uPVC pipes .The uPVC pipes won´t get Corrode.

Casing Shallow (CS): CS pipe suitable for well depth up to 80 m

Casing Medium (CM) : CM pipe suitable for well depth up to 250 m

Product range

Pipe Specification Range
PVC Casing pipe IS 12818 40mm to 225mm

Advantages of Jawan uPVC Casing Pipe

Jawan uPVC Casing pipe following advantages

  • Light Weight
  • Easy transport
  • Easy to handle
  • Easy to installation
  • Reasonable cost compare to others
  • Corrosion Resistance
  • Good Chemical Resistance
  • Self Extinguishing Properties
  • Trapezoidal threading for Anchoring
  • Maintenance cost is very low compare to others

Technical Specification

Properties Units Value Obtained Value Method
Specific Gravity Gm/cc 1.40- 1.45 1.42 IS8543(part 1/sec2):1979
Tensile Strength Mpa 45 min 50 IS 8543(part 4/sec 1)
Vicat Softening temperature o C 78 82 IS 6307:1985

Our unique product is the UPVC-Threaded Superior Quality Special purpose ASTM Plumbing Pipe for 100% Leak proof Application having sizes of 21mm O.D to 48 mm O.D.

High Density Polyethylene (HDPE) pipes are produced in all standard sizes from 16 to 160 mm outside diameter, and are available in standard lengths of 50, 100, and 200 and up to 500meter coils, or 6 & 12 meter straight pipes depending on pipe dimensions and customer specifications.

All dimensions are within the IS: 4984 - 1987/1995 tolerance.

Key Benefits

  • Light in weight-specific gravity : 0.955
  • Withstand pressure up to 15Kg/cm 2.
  • Flexible, therefore, absorbs stress unlike rigid PVC.
  • Unbreakable and undeniable.
  • Sizes up to 75mm or 2.5" can be supplied in coils of 50 or 100 meters, thus eliminating joints.
  • Can be butt welded at site in minutes making joints very strong.
  • Non-toxic and physiologically harmless and safe for portable water supplies.
  • Completely inert, unaffected by acids, alkalis or any solutions from pH 0 to 14.
  • Withstand temperature up to 45-50 0 C, in constant use.
  • Safe for lying under water, across river or lake, in coastal salty marshes and other corrosive soils.
  • Economical for transporting corrosive chemicals and fluids within the plant.
  • Ultra smooth interior / very low friction.
  • Contains 2.3% carbon, the optimum for UV protection.
  • Up to 50 years durability.

ARVIND & JAWAN HDPE Pipes Applications

The List below shows the Commercial Applications that ARVIND & JAWAN branded HDPE Pipes are being used for.

  • Drinking Water Supply
  • Tube Wells
  • Irrigation
  • Sewage/Drainage
  • Fuel Gas
  • Chemical Industry

Drinking Water Supply

ARVIND & JAWAN HDPE Pipes are physiologically harmless and can, therefore be used for drinking water supply in towns and villages. They are at an advantage where long lengths have to be laid. Because of their flexibility and toughness, the pipes can be easily laid in rocky or hilly areas, through rivers, lakes and coastal area. The pipes are stable against most aggressive chemicals and corrosive soils and are unaffected by salt water. ARVIND & JAWAN HDPE pipes can be laid either in long continues lengths or in smaller pieces. These can be welded together with the easy butt-welding method. ARVIND & JAWAN HDPE pipes have a life span of approximately 50 years under normal conditions. It may be noted that HDPE pipes have been approved for carrying drinking water by the ministry of health, government of India.

Tube Wells

As compared with G.I. pipes, ARVIND HDPE pipes show better performance in tube well boring both shallow and deep in all respects. Through the use of these pipes, the suction performance of tube well pipes remains unchanged over a number of years.As suction pipes for hand pumps and as suction and delivery pipes in pump sets, ARVIND HDPE pipes are satisfactorily serviceable and long lasting.

Irrigation's

ARVIND & JAWAN HDPE Pipes are flexible and can be laid on the ground because sunlight and whether do not have any detrimental effect on them. Heavy duty pipes can withstand water pressure up to 10kg/cm 2 . ARVIND & JAWAN HDPE Pipes are so tough that they stand up to the roughest use. They have therefore, been used extensively for irrigation in many parts of the state. Their inherent light weight characteristics makes them particularly suited for sprinkler irrigation systems.

Sewage/Drainage

Ordinarily, pipes are required for sewage and drainage; do not have to stand pressure higher than 2.5 atm. In view of this, thin walled ARVIND HDPE Pipes are most economical for this. Also their resistance to chemicals allow laying highly corrosive soils and in sea water.

Fuel Gas

ARVIND HDPE Pipes can be used for fuel gas supply, where their easy installation and low permeability to gases can be used to advantage.

Chemical Industry

In chemical industry, ARVIND HDPE Pipes have a number of applications. They are highly suitable.

  • For alkaline or acidic medium
  • In handling acids/alkalis/salts/lab drains/chemical fumes

In process lines for corrosive Chemicals. Above applications are made possible because HDPE has inherent chemical resistance and is completely inert to actions of various acids, alkalis, slurries and almost any solution from pH 0 to 14. Because of these properties, the pipes can effectively replace lead, glass, rubber, copper, stainless steel and other expensive materials.